Greenlight Marine Grade Epoxy Resin System with Fast Hardener (6oz)

If you are repairing a gnarly ding or have a couple of boards to fix, then this 6oz Resin and Hardener kit is what you need. 

• Can be used on BOTH Epoxy and PU boards.
• Epoxy resin is stronger than Superman and doesn't have the nasty smell that PU resin tends to have. 
• Epoxy resin cures based on temperature. Do leave your board in a warm place, don't leave it in direct sunlight. 
• Epoxy resin MUST be mixed in a 2:1 ratio, eg 10ml of resin and 5ml of hardener. We use 30ml clear measuring cups and a kitchen scale. 

Greenlight Marine Grade Epoxy Resin System is the result of 15 years of epoxy resin usage and development focused on solving the common problems associated with using epoxy resin in less than optimal environments (a.k.a. your typical dusty DIY workspaces)

Features:

• Self Leveling
• High Surface Tension Tolerant of Small Dust Particles (greatly eliminates pinholes and fisheyes typical of epoxy sealcoats*)
• Integrated Bubble Releasing Agent
• High Gloss Finish
• Easy 2:1 Mix Ratio
• Water Resistant for all Marine Applications
• U.V. Resistant
• Ultra Clear Resin for Coloring with Epoxy Pigments or Tints
• 100% Solids (Very low V.O.C)
• Proudly Made in U.S.A

*Recommended sealcoat amount for surfboards is 3 oz. mixed resin per linear foot of board. For example, a 6'0" long surfboard would use 18 oz mixed resin (6 x 3 oz.) for excellent results.

Also minimal brush strokes leads to a better finish. Brush it out once to cover and walk away.